Special decoder, plug/play for Atlas HO Scale Alco S Switchers. PnP format, requires some wiring.
More Info and Picture
User Manual (pdf - 328 kB)

Special decoder, plug/play for LifeLike,GP-7, GP-9, GP-30, SD60, Alco S Switchers and other new releases. Silent running, special effects, 128ss, advanced format. 4 functions, no wires, unique design has pins mounted to decoder for easiest installation in DCC.
See decoder comparison with pictures here!
installation precautions
TTE/GP7/30 Picture!
Proto 2000 GP-9 In Stock ...
User Manual (pdf - 388 kB)
Tony's 180 Ohm Resistor

Special decoder, plug/play for Kato RS-2/RSC-2, 128ss, advanced format. Silent running, special effects, 4 functions, no wires, unique design has pins mounted to decoder for easiest installation in DCC. This decoder also works for Atlas U23,C30,U33, GP40; Kato RS-2, C44-9W; Bachman Doodlebug, Stew., VO1000 and Intermountain.
See decoder comparison with pictures here!
TTE/RS2 Picture!
User Manual (pdf - 353 kB)

Easy-to-install, advanced decoder for all the popular Lifelike Proto 2000 SW Switchers. Silent running, special effects, easy-to-install, 128 Speed Steps, Ops Mode Programmable, 4 Digit Address, 4 Functions, Loadable Speed Tables.
More information is here!
Picture is available here!
User Manual (pdf - 367 kB)

• Asymmetrical DCC* for location specific commands
• USP Technology*: Uninterruptible Signal Processing
• RailCom* : Full NMRA DCC Bi-directional Communication
L 0.91" x W 0.65"x H 0.26", L 23.0 mm x W 16.5 mm x H 6.5 mm, suitable for HO, most S and many larger scale locos, high frequency back emf motor control, 4 built-in function outputs plus a SUSI interface for sound and additional function control. Each of the 4 function outputs can be configured to one or more of 14 DCC functions, the effects can be activated by up to three separate configurable DCC functions and the decoder operation effected by 3 additional configurable function inputs.
Review
Lenz Assymetrical DCC and ABC
Test Video

Gold JST with harness.
Review
Lenz Assymetrical DCC and ABC
Test Video

Gold JST with harness/NMRA plug.
Review
Lenz Assymetrical DCC and ABC
Test Video

The Gold Super Pack incudes a Gold JST decoder, both a wire harness and a harness with a medium plug and a Power-1 module PRESOLDERED to the Gold decoder for easy installation.
Review
Lenz Assymetrical DCC and ABC
Test Video

2.5 Amp continuous/5.0 Amp peak, 6 FX functions, screw terminal motor & pick-up connections. Dirty-Track technology capable using Lenz Power-3 ONLY.
• Precision silent back emf control that can be tailored to the needs of the locomotive. Precision silent back emf control that can be tailored to the needs of the locomotive. 
• USB - screw terminal connections to an external power module provides the ability to detect the DCC signal even on dirty track.  We will provide a "Power -3" module later in the Fall and also provide instructions for optional user installed battery backup.
• 8 function outputs with special lighting effects
• RailCom  support for both address and data transmission. (our implementation of NMRA Bi directional)
• 3 Amp continuous load without heat sync (optional heat sync can be installed for greater current capacity)
• Short and overload protected so can handle a hard stall of over 10 Amps!
• SUSI sound interface for plug in sound or function module.
• Read control input for optional automatic stopping.
• All the advanced NMRA DCC features you have come to expect in our Gold Series decoders.
Announcement, More Info
Test Video
QSI GWire Receiver
Lenz Power 3 power backup module

• Asymmetrical DCC* for location specific commands
• USP Technology*: Uninterruptible Signal Processing
• RailCom* : Full NMRA DCC Bi-directional Communication
Size: L 0.43" x W 0.35"x H 0.11" L11 x W9 x H2.8 mm
0.5 amp continuous, 0.8 amp peak, overload protected
Announcement, More Info
Test Video

• Asymmetrical DCC* for location specific commands
• USP Technology*: Uninterruptible Signal Processing
• RailCom* : Full NMRA DCC Bi-directional Communication
Size: L 0.43" x W 0.35"x H 0.11" L11 x W9 x H2.8 mm
0.5 amp continuous, 0.8 amp peak, overload protected
Comes with the NEM651 plug which is the NMRA small plug.
Announcement, More Info
Test Video

A specialty decoder designed for easy plug into locomotives that come equipped with the 21 pin socket. The feature set of the Silver 21 decoder is identical to Lenz's other 1 Amp Silver decoders and includes 4 functions plus their fantastic silent back emf motor drive.
More Info

4 function output decoder with a built in medium plug. Back emf motor control. All the high end DCC features common in Lenz Decoders, plus a broad array of advanced lighting features and function mapping capabilities.  Three of the function outputs and one common go through the NMRA Plug.  The 4th function output plus a function common output are available by soldering wires to the top of the decoder. 
1 Amp continuous, 1.8 Amp maximum, 3 amp hard continuous stall.
More Info

N Scale BEMF Decoder, 2 Functions, 0.5 A
Size: L 0.43" x W 0.35"x H 0.11" L 11 x W 9 x H 2.8 mm

Size: L 0.91" x W 0.66"x H 0.12" L 23mm x W 16.6mm x H 2.9mm
Lenz's thinnest HO scale decoder that will fit in very small spaces.
Superior performance and feature set at a great price.
Details
Lenz Assymetrical DCC and ABC

Ultra-thin size: .12"H X 1.00"L X 0.61W"
Silent back emf motor drive, 3 function outputs (A, B and C) with special lighting effects and a host of configurable CVs. The Standard line decoders do not come with Asymmetrical DCC, Bi-Directional DCC, USP nor have a SUSI sound interface.
More

Long wire harness assembly with low profile, molded NMRA plug for HO decoders. Ideal for LL; PA, E7 and E6 locos. Also good for Soundtraxx DSD installations in DCC ready locos. Whpl mates with the following decoders that have the miniature header assemblies:
LE130,LE131,D104(p),DH155(p),DH155,DH121,DH121(p),DH140,DH140(p) and all Soundtraxx DSD and DSX sound units.

4 function, 1.8 amp silent back emf decoder with a SUSI sound interface. SUSI is a 4 wire interface between a decoder and a sound module or function module. 1.5" x 0.69" x 0.16".
MORE

Function only decoder with extended effects. 6 functions, 0.4A.

Accessory decoder, all scales, 4 functions, w/feedback (4 outputs)
Compare to others.

Controls up to 6 independent switch machines, compatible with all NMRA DCC systems. 1024 accessory decoder addresses, sequential or up to 6 independent addresses can be used. High amperage output to enable safe operation of Peco and Atlas dual coil switch machines, each output short protected. Any combination of 6 Atlas, Bachman Easy Track, Kato Unitrack, LGB turnouts, Peco, Tortoise™, or other popular brands.
MORE
PICTURE
REVIEW!