| |
MRC DCC Components
MRC's PRODIGY DCC is a breath of fresh air. This
is the first DCC system with one touch, one button programming.
The PRODIGY DCC system has been ingeniously engineered to let most
people run trains just by following the Quick Start instructions
on the handset. Within minutes, you'll be controlling multiple locos
on the same track, going at different speeds in different directions.
MRC AG950 Power Command 9500 DC Power Supply
MRC |
$113.89
List $169.98 |
|
 |
• Momentum control with on–off switch
• Fixed AC terminals for accessories
• Fixed DC terminals for expansion
• LEDs indicate momentum, power output and overload conditions
• Advanced Proportional Tracking Control for maximum realism
• Spring-loaded brake switch
• Direction control switch
• 5-year limited warranty |
|
MRC 0001200 Tech 6 2.0 Powerpack
MRC |
$87.09
List $129.98 |
|
 |
The Tech 6, 2.0, item no. 0001200 - is a stand alone powerpack, with incorporated throttle and direction buttons, plus accessory function buttons for DCC use, rated at 2 Amps, that will control either one DC loco or one DC/DCC sound equipped loco. Comes with power supply.
Also, by the addition of the item no 0001203, Tech 6 handheld (optional), this will let you run either one DC loco or up to six DC/DCC sound locos, using short two digit addresses 1 to 6.
You can only use 1 handheld plugged into the main unit at any time. |
|
MRC 0001201 Tech 6 Sound Controller 6.0
MRC |
$194.29
List $289.98 |
|
 |
The Tech 6, 6.0, item no. 0001201- is a 6 Amp power pack, consisting of three pieces - power supply, base unit without any controls, and a handheld. This unit will operate either 1 DC loco or up to 6 DC/DCC sound locos. Again you can only use 1 handheld plugged into the unit at any given time. |
|
MRC 0001203 Tech 6 Handheld
MRC |
$66.99
List $99.98 |
|
 |
The Tech 6 Handheld plugs into the Tech 6 Sound Controller to give you the freedom to walk around your layout while operating your trains. It also permits the control of up to 6 decoder-equipped locomotives from this one handheld. Optional extension plates (item #0001501) can add extended range by wiring them around your layout. |
|
MRC 0001301 AC Power Pack 80 Watts
MRC |
$93.79
List $139.98 |
|
 |
• Special sine-wave output circuitry provides plenty of controlled power
• Separate, UL Listed power supply keeps the THROTTLEPACK AC footprint small
• Whistle/horn & bell buttons included
• Special “Booster” button for added power when needed
• Precise, slow-speed throttle control for realistic performance
• Direction button |
|
MRC 0001410 Prodigy Adv 2 Wireless
MRC |
$379.95
List $629.98 |
|
 |
Stand alone system that comes equipped with power supply, console and
wireless hand-held. Most importantly, the customer can use it to not only
operate his trains but can also program from the handheld. This Total
Control Radio System (TCRS) is called duplex control.
See all the Prodigy Advance Wireless 2 Features in the Prodigy
Advance 2 below.
Review |
|
MRC 0001411 Prodigy Advance Wireless Handheld
MRC |
$140.69
List $209.98 |
|
 |
Add More Operators to your layout
This is the same Cab that comes with the Prodigy Advance 2 |
|
MRC 0001412 Prodigy Advance Wireless Upgrade
MRC |
$194.95
List $329.98 |
|
 |
Radio Receiver and Wireless Throttle to upgrade a Prodigy Advance or Prodigy
Express to wireless operation. |
|
MRC 0001415 Prodigy Advance Cab Handheld
MRC |
$84.41
List $125.98 |
|
 |
Throttle with LCD screen. Not compatible with original Prodigy!
This is the same Cab that comes with the Prodigy Advance 2
Add More Operators to your layout |
|
MRC 0001417 Prodigy Pro-Elite 10 Amp
MRC |
$317.99
List $529.98 |
|
 |
Not Yet Available From MRC |
|
MRC 001501 Prodigy Advance2 Extension
Plate
MRC |
$26.79
List $39.98
|
|
 |
|
Cab Bus fascia panel. Plug-in extensions for layout.
Item no. 0001501, extension plates, (same ones used for prodigy dcc systems), will allow you to add extra handheld plug in ports around your layout. |
|
MRC 001502 Prodigy Advance2 Extension
Plate with Power Supply
MRC |
$37.51
List $55.98
|
|
 |
|
Cab bus extensions for layout fascia
panels with power supply. Use for layouts using
more than 5 handheld throttles.
|
|
MRC 0001505 Prodigy District Power Booster 3.5 A
MRC |
$99.95
List $174.98 |
|
 |
Currently Inactive
Under table mounting
RJ-45 connector for use with Prodigy Advance2 & Express
Provides an additional wherever needed to create power districts
Includes 120-240 VAC universal power supply. |
|
MRC 0001510 Wireless PC Interface for Prodigy Advance2 Wireless
MRC |
$71.23
List $74.98 |
|
|
Wireless PC Interface for Prodigy Advance2 Wireless |
|
MRC 0001515 Wireless PC Interface for Prodigy Advance2 or Prodigy Express
MRC |
$94.98
List $99.98 |
|
|
Wireless PC Interface, Prodigy Advance2 or Prodigy Express.
This is a wireless PC interface for the non radio systems. |
|
MRC 0001516 PC Cable Interface for All Systems
MRC |
$54.13
List $56.98 |
|
|
MRC: PC Cable Interface for All Systems |
|
MRC 0001521 Power Booster 8 Amp
MRC |
$139.95
List $199.98 |
|
|
NEW
8A power booster, includes power supply.
Caution: It is recommended that DCC circuit breakers such as the DCC Specialties
PSX series be used with 8 Amp Power Booster |
|
MRC 0001526 Fast Clock Module
MRC |
$33.49
List $49.98 |
|
|
Not Yet Available From MRC |
|
|
 System|mrc|2|1|0001414.jpg|0001414a.jpg)
|mrc|1|1|mrc_1501.jpg)
|mrc|1|1|mrc_1502.jpg)
|mrc|1|1|mrc_1505.jpg)