D102 Decoder.

[go to NCE Corp. catalog page]

1.3 Amp continuous, 2.0 Amp peak. This is an EPF (extended packet format) decoder supporting :

• Four digit address (long)
• Uploadable speed table with programmable motor drive frequency
• 128 speed mode operation
• Decoder assisted consisting
• All forms of operations mode programming (programming on the mainline)
• Programmable Start Voltage works for all speed modes
• Available in US and European versions
  • US version - headlight plus F1 (headlight is also configurable as a Mars light)
  • European version - automatic reversing headlights

Every attempt has been made to ensure this decoder complies with all applicable NMRA Standards and Recommended Practice.

Operations Mode Programming :

Decoders will only respond to long form ops mode programming at their normal (long or short) address. They do not respoond to the long form ops mode programming instructions at their consist address (per RP-9.2.1.). Use the short form to modify consist momentum. Lenz command stations only generate short form and Digitrax only generate long form. NCE Corporation's Master Series, System One, Dynatrol and Ramtraxx use both types automatically.

We welcome comments or suggestions from readers; please write or call.