INTRODUCING TONY'S "eTIPS" NEWSLETTER
Tony's own tips as well as news from the world of DC and DCC model railroading delivered straight to your inbox. Click here to sign up!

  HOME > TECH BULLETIN > DCC SOUND >
 

New LokSound V4.0 Technical Data

Buy It Here
LokSound 3.0 Discontinued

ESU has published technical data on the new LokSound V4.0.

Modes: NMRA/DCC with 14, 28, 128 drive steps and automatic detection.
  DCC 2-digit & 4-digit addresses.
  Digital Motorola® (old and new), up to 28 drivesteps in Motorola®-mode. Up to 255 addresses in Motorola®-mode. 2nd address for function keys F5 to F8.
  Selectrix® operation with 31 drive steps. Extended functions for up to 8 function keys (suitable control station necessary).
  Analogue DC and AC operation (deactivation possible).
  Automatic recognition of the operating mode and the DCC drive step configuration.
  Supporting Lenz® LG100, Märklin®, Roco® braking modes. Supporting Lenz ABC brakes and Märklin® brake mode
  Reverse bit
  Intelligent programming mode with Märklin® 6021®. Suppoting programming modes for ROCO Lokmaus 2 and ROCO Multimouse.
  Connection to DC-, AC-motors with permanent magnet.
  Noiseless, motor saving control with 40 / 20 kHz pwm frequency
  Motor output protected against overload. Load control of the 5th generation (possible to deactovate) Dynamic Drive Control.
Function outputs: 4 amplified outputs
  max. 250mA load for each output
  Total current for all function outputs ca. 500mA. Outputs short circuit protected
  Free individual function mapping. Function keys F0 to F28
  2 logic outputs. Serial protocol for C-Sinus and light control
Sound unit: 8 (!) individual sound channels
  High power amplification with about 1.8 Watts
  Soundfiles in the internal flash memory modifiable
  Modes for Steam-, Dieselhydraulic- , Dieselelectric- , Electric locomotives, battery railcars, hybrid locomotives and so on
  32 MBit sound memory (up to 276 seconds)
Energy buffering: Connecting for ESU PowerPack available
Communication: Full RailComPlus® integration
Loudspeakers: Impedance 4-8 Ohms, 4 Ohms recommended. Special speaker 4 Ohms, 23 mm diameter (with sound chamber) included in delivery
Dimensions: 30.0mm x 15.5mm x 5.5mm
  Phone: 800-978-3472 or 802-878-5005.
The entire site © 1997-2010 by Tony's Train Exchange. All rights reserved.
Can't find it? Try Tony's Sitemap.